Remote Car Key 4D-67 Chip Suitable for Toyota Kluger 3.3L

Feature
High quality materials and humanized precise design (no logos)
The symbol of elegant and fashion, distinguished identity accompany with you.
Excellent abrasion resistance, it can be used for a long time.
Comfortable tactility and delicate polish.

Specification
Type: Remote Car Key
Chip: 4D-67
Color: Black
Quantity Sold: One
Battery Included: Yes
Material: Plastic and metal

Frequency: 433mhz
Note: If you need a frequency of 315mhz, please contact us

Compatible with
Suitable For Toyota Prado 120 09/2004-08/2009
Suitable For Toyota RAV4 7/2003-11/2005
Suitable For Toyota Kluger 8/2003-5/2007
Suitable For Toyota Tarago 4/2003-1/2006

Important Notice
To check this is the correct key for your car, you can pop open your existing key case cover and check the number stamped. The remote part number should be "50171" or "42050".

Package
1* Remote Car Key

Remote
Open Driver side door
Put the Original key in and out of ignition 2 times
Close and open driver door 2 times
Original Key in and out once
Shut and open door twice
Close door
Put Original Key in the ignition and Turn ignition on
Turn ignition off and remove key
Door locks will cycle
Do the following for all remotes: Press lock and unlock together for 1s, then press the lock button
Locks will cycle, put key in ignition, turn to on then off
Remove key from ignition, close door and test remote
To Delete All Remotes from the Vehicle: At Step 7, turn the key on and off 5 times then remove key, door locks will cycle 5 times. Turn the key on then off. Open shut door. All remotes that were coded into the car, have now been removed.

Program keys
Put Original master key in and out of ignition 5 times. Finish with key in ignition (in, out, in, out, in, out, in, out, in)
Open and shut door 6 times
Remove original key and insert the new key (Do not turn the key, just insert it into the ignition)
Leave for 60s (or til light goes out)
After 60s security light stops flashing then you can start car.
Take key out
Open and shut door
If you make a mistake at any point in the procedure, use original key to start the car. Take the key out, open and close door. Now you are ready to start again.