Air Intake Snorkel Kit for Mitsubishi Pajero NS NT NW V-Spec 3. 2 3. 8 2006-Onward
Air Intake Snorkel Kit for Mitsubishi Pajero NS NT NW V-Spec 3. 2 3. 8 2006-Onward
SKU:31MI208-FA
Compatible with
Suitable for 2006 - 2009 Mitsubishi Pajero 3.2 DI-D (NS,NT) SUV Diesel 118
Suitable for 2006 - 2009 Mitsubishi Pajero 3.2 DI-D (NS,NT) SUV Diesel 125
Suitable for 2009 Mitsubishi Pajero 3.2 TD (NS,NT) SUV Diesel 147
Suitable for 2006 - 2013 Mitsubishi Pajero 3.8 V6 (NS,NT) SUV Petrol 184
Suitable for 2009 Mitsubishi Pajero 3.8 V6 (NS,NT) SUV Petrol 175
Description
1. This snorkel kits is designed to deliver a huge volume of the coolest and cleanest air possible into the stock air cleaner assembly of NM engines.
2. With the huge air flow demands of each engine in the vehicle, Kaka Auto Parts took the decision to design a snorkel system that raised the air intake to prevent ingesting harmful elements to the vehicles air cleaner.
3. Huge air flow is but one aspect of the ultimate in snorkel design. The Kaka Auto Parts snorkel air ram is designed to perform two very important roles. The most obvious is to funnel cool clean air into the snorkel body - but just as importantly, the Kaka Auto Parts air ram acts as a highly efficient water separator to remove rain water from the incoming air stream - thus ensuring safe engine operation through even the most torrential tropical storms.
4. The Kaka Auto Parts Snorkel body and air ram is manufactured to the highest standards in durable, UV stable, cross linked polyethylene material. In addition, the substantial material wall thickness delivers huge physical strength to ensure that the snorkel breezes through the toughest off-road conditions on the planet.
Features
-Kaka Auto Parts Automotive proudly product, moulded and manufactured
-Raised air intake to prevent your engine from ingesting harmful elements
-Increased airflow for the NM engine
-Water separating air ram design to remove water from the air stream
-Durable and UV stable snorkel and air ram for added strength
-Comprehensive 4WD Snorkel an accurate fitting template for assisting with installation.
Specification:
Condition: Brand New
Type: Snorkel Kit
Warranty: 1 Year
Quantity: 1 Set
Package Include:
1 Set Snorkel Kit
Instructions:
1. Remove : R/H wheelarch liner
: Grille
: R/H headlight
: R/H side indicator and wiring loom
: Air intake ducting
: Air cleaner housing and mounting bracket
2. Tape the template to the upper rear corner of the right hand guard. Using a felt tip pen, mark all hole positions. Remove template.
3. Drill a 4mm pilot hole for each hole position. Using the step drill, drill the 3 snorkel mounting hole positions to 16mm. Using the 95mm holesaw, drill the main hole for the snorkel snout. Deburr and paint all holes.
4. Position the holesaw centre fixture into the hole in the inner guard behind theheadlight, mark the 2 hole positions, drill a 1/8” hole for each position, fasten the holesaw centre fixture into position using screws , with the holesaw centre fixture installed enlarge the existing hole, using the 95mm holesaw. Deburr and paint hole, install rubber edging to hole trimming any excess edging.
5. Apply Loctite to each of the stainless steel mounting studs and install the studs finger tight into the snorkel body mounting inserts. Fasten the upper mounting bracket to the snorkel body. Stick masking tape onto the ‘A’ pillar approximately in the upper mounting bracket position, carefully position the snorkel body onto the guard. With the snorkel correctly positioned on the guard, mark the position of the upper mounting bracket on the masking tape. Remove the snorkel body.
6. Remove the bracket from the snorkel body, place the bracket onto the ‘A’ pillar with the bracket correctly positioned, mark the 3 mounting hole positions, drill the 3 marked holes on the ‘A’ pillar to 8mm. Deburr and paint holes.
7. Insert plastic body clips into the ‘A’ pillar, fasten the upper mounting bracket to the ‘A’ pillar, using screws.
8. Relocate the side indicator loom through the rear hole in the inner guard, using cable ties to secure the indicator loom to the other looms.
9. Measure back 25mm from the front air cleaner mounting bracket hole position, drill a 12mm hole, deburr and paint hole, position a spacer washer at each of the air cleaner mounting bracket hole positions, with the spacer washers in position, fasten the air cleaner relocation mounting brackets into position, fasten the air cleaner mounting bracket to the relocation brackets.
10. Install the inner duct into position, with the inner duct in position apply a liberal amount of Sikaflex adhesive sealant to the inside of the duct, apply Sikaflex adhesive sealant to the snorkel body snout to ensure a watertight seal between the snorkel body snout and inner duct is achieved, install the snorkel body to the guard, guiding the snorkel body snout into the inner duct with the snorkel body correctly positioned fasten to the guard using necessary hardware, fasten upper mounting bracket to the snorkel body.
11. Secure the inner duct to the snorkel body using S/T screw, ensure the inner duct is hard up against the shoulder on the snorkel body snout before securing to the snorkel body.
12. Drill a 5mm hole between the first and second internal ribs of the air cleaner housing 55mm down from the air filter element recess.
13. Position the hose and hose clamps onto the inner duct, install the air cleaner housing to the vehicle, with the air cleaner housing correctly fastened, install the air cleaner entry duct. With the air cleaner entry duct correctly positioned, mark the hole position through the air cleaner housing onto the air cleaner entry duct side pad. Remove air cleaner entry duct and air cleaner housing.
14. Drill the marked hole position to 5mm. Apply Sikaflex adhesive sealant to the pad, apply Sikaflex adhesive sealant to the air cleaner entry duct and the air cleaner housing inlet, secure the air cleaner entry duct to the air cleaner housing using pop rivet, ensuring a watertight connection between the air cleaner entry duct and air cleaner housing is achieved, applying more sealant if required or removing any excess sealant to ensure a neat job.
15. Install the air cleaner housing to the air cleaner housing mounting bracket and fasten, with the hose and hose clamps correctly positioned, fasten the hose clamps to complete the connection of the inner duct to the air cleaner entry duct.
16. Re-install air cleaner element, air cleaner lid and secure, re-install the headlight and grille, re-install side indicator and re-connect loom, check operation of the headlight and side indicator, before installing the inner guard liner.
17. Install the air ram assembly to the snorkel body and fasten clamp.
Note:
*Sourced From Professional Aftermarket Manufacturer, QUALITY GUARANTEED.*
Air Intake Snorkel Kit for Mitsubishi Pajero NS NT NW V-Spec 3. 2 3. 8 2006-Onward
Compatible with
Suitable for 2006 - 2009 Mitsubishi Pajero 3.2 DI-D (NS,NT) SUV Diesel 118
Suitable for 2006 - 2009 Mitsubishi Pajero 3.2 DI-D (NS,NT) SUV Diesel 125
Suitable for 2009 Mitsubishi Pajero 3.2 TD (NS,NT) SUV Diesel 147
Suitable for 2006 - 2013 Mitsubishi Pajero 3.8 V6 (NS,NT) SUV Petrol 184
Suitable for 2009 Mitsubishi Pajero 3.8 V6 (NS,NT) SUV Petrol 175
Description
1. This snorkel kits is designed to deliver a huge volume of the coolest and cleanest air possible into the stock air cleaner assembly of NM engines.
2. With the huge air flow demands of each engine in the vehicle, Kaka Auto Parts took the decision to design a snorkel system that raised the air intake to prevent ingesting harmful elements to the vehicles air cleaner.
3. Huge air flow is but one aspect of the ultimate in snorkel design. The Kaka Auto Parts snorkel air ram is designed to perform two very important roles. The most obvious is to funnel cool clean air into the snorkel body - but just as importantly, the Kaka Auto Parts air ram acts as a highly efficient water separator to remove rain water from the incoming air stream - thus ensuring safe engine operation through even the most torrential tropical storms.
4. The Kaka Auto Parts Snorkel body and air ram is manufactured to the highest standards in durable, UV stable, cross linked polyethylene material. In addition, the substantial material wall thickness delivers huge physical strength to ensure that the snorkel breezes through the toughest off-road conditions on the planet.
Features
-Kaka Auto Parts Automotive proudly product, moulded and manufactured
-Raised air intake to prevent your engine from ingesting harmful elements
-Increased airflow for the NM engine
-Water separating air ram design to remove water from the air stream
-Durable and UV stable snorkel and air ram for added strength
-Comprehensive 4WD Snorkel an accurate fitting template for assisting with installation.
Specification:
Condition: Brand New
Type: Snorkel Kit
Warranty: 1 Year
Quantity: 1 Set
Package Include:
1 Set Snorkel Kit
Instructions:
1. Remove : R/H wheelarch liner
: Grille
: R/H headlight
: R/H side indicator and wiring loom
: Air intake ducting
: Air cleaner housing and mounting bracket
2. Tape the template to the upper rear corner of the right hand guard. Using a felt tip pen, mark all hole positions. Remove template.
3. Drill a 4mm pilot hole for each hole position. Using the step drill, drill the 3 snorkel mounting hole positions to 16mm. Using the 95mm holesaw, drill the main hole for the snorkel snout. Deburr and paint all holes.
4. Position the holesaw centre fixture into the hole in the inner guard behind theheadlight, mark the 2 hole positions, drill a 1/8” hole for each position, fasten the holesaw centre fixture into position using screws , with the holesaw centre fixture installed enlarge the existing hole, using the 95mm holesaw. Deburr and paint hole, install rubber edging to hole trimming any excess edging.
5. Apply Loctite to each of the stainless steel mounting studs and install the studs finger tight into the snorkel body mounting inserts. Fasten the upper mounting bracket to the snorkel body. Stick masking tape onto the ‘A’ pillar approximately in the upper mounting bracket position, carefully position the snorkel body onto the guard. With the snorkel correctly positioned on the guard, mark the position of the upper mounting bracket on the masking tape. Remove the snorkel body.
6. Remove the bracket from the snorkel body, place the bracket onto the ‘A’ pillar with the bracket correctly positioned, mark the 3 mounting hole positions, drill the 3 marked holes on the ‘A’ pillar to 8mm. Deburr and paint holes.
7. Insert plastic body clips into the ‘A’ pillar, fasten the upper mounting bracket to the ‘A’ pillar, using screws.
8. Relocate the side indicator loom through the rear hole in the inner guard, using cable ties to secure the indicator loom to the other looms.
9. Measure back 25mm from the front air cleaner mounting bracket hole position, drill a 12mm hole, deburr and paint hole, position a spacer washer at each of the air cleaner mounting bracket hole positions, with the spacer washers in position, fasten the air cleaner relocation mounting brackets into position, fasten the air cleaner mounting bracket to the relocation brackets.
10. Install the inner duct into position, with the inner duct in position apply a liberal amount of Sikaflex adhesive sealant to the inside of the duct, apply Sikaflex adhesive sealant to the snorkel body snout to ensure a watertight seal between the snorkel body snout and inner duct is achieved, install the snorkel body to the guard, guiding the snorkel body snout into the inner duct with the snorkel body correctly positioned fasten to the guard using necessary hardware, fasten upper mounting bracket to the snorkel body.
11. Secure the inner duct to the snorkel body using S/T screw, ensure the inner duct is hard up against the shoulder on the snorkel body snout before securing to the snorkel body.
12. Drill a 5mm hole between the first and second internal ribs of the air cleaner housing 55mm down from the air filter element recess.
13. Position the hose and hose clamps onto the inner duct, install the air cleaner housing to the vehicle, with the air cleaner housing correctly fastened, install the air cleaner entry duct. With the air cleaner entry duct correctly positioned, mark the hole position through the air cleaner housing onto the air cleaner entry duct side pad. Remove air cleaner entry duct and air cleaner housing.
14. Drill the marked hole position to 5mm. Apply Sikaflex adhesive sealant to the pad, apply Sikaflex adhesive sealant to the air cleaner entry duct and the air cleaner housing inlet, secure the air cleaner entry duct to the air cleaner housing using pop rivet, ensuring a watertight connection between the air cleaner entry duct and air cleaner housing is achieved, applying more sealant if required or removing any excess sealant to ensure a neat job.
15. Install the air cleaner housing to the air cleaner housing mounting bracket and fasten, with the hose and hose clamps correctly positioned, fasten the hose clamps to complete the connection of the inner duct to the air cleaner entry duct.
16. Re-install air cleaner element, air cleaner lid and secure, re-install the headlight and grille, re-install side indicator and re-connect loom, check operation of the headlight and side indicator, before installing the inner guard liner.
17. Install the air ram assembly to the snorkel body and fasten clamp.
Note:
*Sourced From Professional Aftermarket Manufacturer, QUALITY GUARANTEED.*