Car Butyl Rubber Sound Deadener Proofing Roll Insulation Self Adhesive

Features

Strong self-adhesive

Aluminium constraining surface

Professional butyl-based construction

Effectively absorbs sound and vibration

Great performance in extreme temperatures

Excellent for sealing against water and air ingress

Eco-friendly material

Non-toxic, odourless and non-corrosive

Mineral oils and petrol resistant

Non-flammable

Easily cut to suit your requirement

Specifications

Material:  Aluminum Foil + Butyl Rubber + Wax Paper; Some models are Foams (please check carefully before you buy.)

Color : Black / Silver

Waterproof & Fire Resistant : YES

Recommended Install Temperature: -10°C ~ +60°C

Resistance Temperature Range: -40°C ~ +149°C

Models:

【Sliver-3.6㎡/1 Roll】 (79UN015)

    Coverage area: 3.6㎡

    Size: 6m * 0.6m

    Thickness: 2.2mm

    Material: Butyl Rubber

    Quantity: 1 Roll

    Color: Silver

【Silver-4㎡/1 Roll】 (79UN017)

    Coverage area: 4㎡

    Size: 8m * 0.5m

    Thickness: 2.2mm

    Material: Butyl Rubber

    Quantity: 1 Roll

    Color: Silver

    Accessory: With Roller 

【Black-4㎡/1 Roll 】(79UN016)

    Coverage area: 4㎡

    Size: 0.375m * 0.25m

    Thickness: 2.2mm

    Material: Butyl Rubber

    Quantity: 1 Roll

    Color: Black

    Accessory: With Roller 

【Silver-4.68㎡/50pcs】 (79UN030)

    Coverage area: 4.68㎡

    Size: 8m * 0.5m

    Thickness: 2mm

    Material: Butyl Rubber 

    Quantity: 50 Sheets

    Color: Silver

Application

Rear decks, Doors, Floors, Any part of the trunk, Quarter panels, Hoods, Pipe lagging, 

Installation

1.Decide what part of the car you want to insulate first:roof,floor,doors or a hood.

2.Remove the remains of the factory insulation once you have dismantled the interior.Properly clean and degrease the surface prior to installation of deadener.

3.Measure the pre-cleaned surface of the prospective spot that you are going to treat.

4.Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper.When your sheet is ready to used,lay that down to the surface and let is glue.Flatten the sheet with hands to avoid air bubbles between

the metal and insulation material.Use a roller for rolling down the foil as a neat step.

Pay Attention:

- Please use gloves for your hands' protection when working with the material.

- Correct installation of material is Presents of successful soundproofing of your car.

- Carefully pre-roll a material to the surface that was priorly cleaned and degreased.

- Special embossing on the foil is made for the convenience of installation so you can see the areas that are

- Rolled properly and those ones that need more pressing.

- Perfect for Automobiles, Condos, Apartments, Studios, Classrooms, Factory and more.