Remote Car Key 50171 4D-67 Chip Suitable for Toyota Prado 120 RAV4 Kluger Tarago
Remote Car Key 50171 4D-67 Chip Suitable for Toyota Prado 120 RAV4 Kluger Tarago
SKU:163TO202
Feature
★ High quality materials and humanized precise design(no logos).
★ The symbol of elegant and fashion, distinguished identity accompany with you.
★ Excellent abrasion resistance, it can be used for a long time.
★ Comfortable tactility and delicate polish.
Specification
Type: Remote Car Key
Chip: 4D-67
Color: Black
Quantity Sold: One
Battery Included: Yes
Material: Plastic and metal
Compatible with
Compatible with Toyota Prado 120 09/2004-08/2009
Compatible with Toyota RAV4 7/2003-11/2005
Compatible with Toyota Kluger 8/2003-5/2007
Compatible with Toyota Tarago 4/2003-1/2006
Important Notice
To check this is correct key for your car, you can pop open your existing key case cover and check number stamped be on remote part number should be "50171" or "42050"
Package
1* Remote Car Key
Remote
1. Open Driver side door
2. Put the Original key in and out of ignition 2 times
3. Close and open driver door 2 times
4. Original Key in and out once
5. Shut and open door twice
6. Close door
7. Put Original Key in the ignition and Turn ignition on
8. Turn ignition off and remove key
9. Door locks will cycle
10. Do the following for all remotes:
Press lock and unlock together for 1s, then press the lock button
11. Locks will cycle put key in ignition turn to on then off
12. Remove key from ignition, close door and test remote
To Delete All Remotes from the Vehicle
At Step 7, turn the key on and off 5 times then remove key, door locks will cycle 5 times. Turn the key on then off. Open shut door. All remotes that were coded into the car, have now been removed.
Program keys
1. Put Original master key in and out of ignition 5 times. Finish with key in ignition (in, out, in, out, in, out, in, out, in)
2. Open and shut door 6 times
3. Remove original key and insert the new key (Do not turn the key, just insert it into the ignition
4. Leave for 60s (or til light goes out)
5. After 60s security light stops flashing then you can start car.
6. Take key out
7. Open and shut door
If you make a mistake at any point in the procedure, use original key to start the car. Take the key out, open and close door. Now you are ready to start again.
Note:
*Sourced From Professional Aftermarket Manufacturer, QUALITY GUARANTEED.*
Remote Car Key 50171 4D-67 Chip Suitable for Toyota Prado 120 RAV4 Kluger Tarago
Feature
★ High quality materials and humanized precise design(no logos).
★ The symbol of elegant and fashion, distinguished identity accompany with you.
★ Excellent abrasion resistance, it can be used for a long time.
★ Comfortable tactility and delicate polish.
Specification
Type: Remote Car Key
Chip: 4D-67
Color: Black
Quantity Sold: One
Battery Included: Yes
Material: Plastic and metal
Compatible with
Compatible with Toyota Prado 120 09/2004-08/2009
Compatible with Toyota RAV4 7/2003-11/2005
Compatible with Toyota Kluger 8/2003-5/2007
Compatible with Toyota Tarago 4/2003-1/2006
Important Notice
To check this is correct key for your car, you can pop open your existing key case cover and check number stamped be on remote part number should be "50171" or "42050"
Package
1* Remote Car Key
Remote
1. Open Driver side door
2. Put the Original key in and out of ignition 2 times
3. Close and open driver door 2 times
4. Original Key in and out once
5. Shut and open door twice
6. Close door
7. Put Original Key in the ignition and Turn ignition on
8. Turn ignition off and remove key
9. Door locks will cycle
10. Do the following for all remotes:
Press lock and unlock together for 1s, then press the lock button
11. Locks will cycle put key in ignition turn to on then off
12. Remove key from ignition, close door and test remote
To Delete All Remotes from the Vehicle
At Step 7, turn the key on and off 5 times then remove key, door locks will cycle 5 times. Turn the key on then off. Open shut door. All remotes that were coded into the car, have now been removed.
Program keys
1. Put Original master key in and out of ignition 5 times. Finish with key in ignition (in, out, in, out, in, out, in, out, in)
2. Open and shut door 6 times
3. Remove original key and insert the new key (Do not turn the key, just insert it into the ignition
4. Leave for 60s (or til light goes out)
5. After 60s security light stops flashing then you can start car.
6. Take key out
7. Open and shut door
If you make a mistake at any point in the procedure, use original key to start the car. Take the key out, open and close door. Now you are ready to start again.
Note:
*Sourced From Professional Aftermarket Manufacturer, QUALITY GUARANTEED.*