Features:
High quality materials with a humanized, precise design (no logos)
A symbol of elegance and fashion, highlighting a distinguished identity
Excellent abrasion resistance for long-term use
Comfortable touch and delicate finish
Specifications:
Brand: MAXCOOL
Type: Remote Car Key
Warranty: 1 Year
Operating Frequency: 315 MHz
Battery Included: Yes
Transponder Chip: ID46-7953
Blade: HU92
System: CAS2
Compatible With:
Suitable For BMW 1 Series E81 (2004–2006)
Suitable For BMW 3 Series E46 (1999–2006)
Suitable For BMW 5 Series E39 / E60 / E61 (1997–2006)
Suitable For BMW 6 Series E63 / E64 (2004–2006)
Suitable For BMW 7 Series E38 (1995–2001)
Suitable For BMW X3 E83 (2004–2007)
Suitable For BMW X5 E53 (2000–2007)
Suitable For BMW Z3 E36/7 / E36/8 (1998–2003)
Suitable For BMW Z4 E85 / E86 (2003–2007)
Package Includes:
1 x Remote Car Key (includes battery)
Note:
Please allow 1-3cm variation due to manual measurement
The product photos may differ slightly in color due to lighting or screen settings
This is a complete remote key including transponder and battery. Key needs to be cut and programmed before use
Important Notice:
Key must be cut and programmed by a locksmith or follow the DIY instructions below
You must have a working black key or remote key
Will not work with grey service keys
Remote Programming Steps (DIY):
1. Program remote once received (central locking will work)
2. Cut key to code at locksmith
3. Program transponder chip to start the car
DIY Remote Programming Procedure:
1. Open driver's door
2. Insert and remove the original key from ignition twice
3. Close and open driver's door twice
4. Insert and remove original key once
5. Close and open driver's door twice again
6. Close the door
7. Insert key and turn ignition ON
8. Turn OFF and remove key
9. Locks will cycle
10. Press LOCK and UNLOCK together for 1 second, then press LOCK only
11. Locks will cycle again. Insert key, turn ON then OFF
12. Remove key, close door, and test remote
DIY Transponder Chip Programming:
1. Insert master key in ignition 5 times, ending with key in ignition
2. Open and shut driver's door 6 times
3. Remove master key and insert new key
4. Wait 60 seconds until security light stops flashing
5. Once the light stops, the new key is programmed
6. Remove key and open/shut door to finish
